In the early days of stereo there were no conventions about where stuff should be positioned left to right in the mix, so drums might end up on one side and vocals on the other. However, today there is a general agreement about where certain instruments ‘aught’ to be placed. For example the bass is almost always placed in the center of the speakers, as is the kick drum and lead vocal.

To retain the clarity of these key mix components it makes sense to pan others out to either side. A bass and vocal won’t compete for space in a mix, but elements that occupy a similar area of the frequency spectrum will (like a lead guitar and vocal). In fact it is also a good idea to keep any similar sounding parts separated (except where a deliberate layering / combining effect is intended). Take for example a doubled guitar part. Positioned together these two tracks will probably fight for space and cause confusion within the mix. However, panned to either side of the mix they can create a thick wall of sound that retains the clarity of each part, where small differences in playing will enhance rather then detract from the track.

The aim is create width, but without imbalance, for example a bass panned hard right would make for an uncomfortable listening experience. A good general principal is that the higher or more secondary a sound is the wider it can be panned without causing such an imbalance in a mix. However, this is not to say that we should not use pan to make elements stand out and create periods of deliberate imbalance to engage the listener. After all pan is as much an effect it is a tool, and lots of tracks will start with a lone element panned hard to one side.

Sometimes we’ll have a mono mix element that we don’t want to pan left or right, but we also don’t want in in the center, detracting from our lead parts. (A clap sound for example) If double tracking isn’t an option then ‘fake’ stereo can be a useful trick to use. Following a similar principal to real double tracking two copies of the original file are created and panned left and right. To one of these copies a small delay is added (around 20-30 milliseconds). This delay is enough to trick the ear into thinking that it is hearing two distinct sounds but short enough not to cause timing issues. It’s a technique that can also be very effective on percussive and other elements such as doubled rap or or backing vocals, and has the added benefit of producing more predictable and controllable results then the traditional double-tracking method.

With the advent of surround mixing the opportunity to experiment without worrying about mixing conventions is once again open and we’ll look more at surround capture and mix techniques in future tips. However, stereo still offers plenty of options for creative uses of pan and it is important to view the above are general guidelines to help create an effective stereo mix rather then hard ‘rules’.

Quality Music radio: DATABLENDER FM

4411
Tv

PressPausePlay

5230
Tv

How to create wide open mixes

6853
Production

Seven ways to reduce noise

8715
Production

Mixing - the 12 step program

8112
Production

Arrangement 101

5643
Production

Tips for mixing the low end

5895
Production

The audible frequency range

6321
Production

Mastering basics for musicians

7472
Mastering

10 questions about mastering your recordings

5875
Mastering

Preparing your mixdown for mastering

5690
Production

Tips for mixing for vinyl

9923
Production

Gez Varley

7038
Interview, synthience

Viktoria Rebeka

5402
Interview, synthience

Andy Wonderland

4898
Interview, synthience

Andrea Suglia

5372
Interview, synthience

Mikrokristal

6317
Interview, synthience

Luke Hess

5721
Interview, synthience

Stereo editing and mastering

5904
Mastering

Preparing music for mastering

5887
Mastering

How the professionals do it

5539
Mastering

Audio mastering in your computer

6074
Mastering

T-Racks mastering audio techniques

10813
Mastering

Digital audio editing

5945
Production

6 mono to stereo methods

5550
Production

Outboard processing

5447
Production

Mixing on headphones

5898
Production

Using the side-chain

4988
Production

Watch your levels

5178
Production

Parallel compression

5720
Production

The sub-kick trick

6537
Production

5 perspective tips

5292
Production

Vocals in the Mix

5366
Production

Panning Tips

5963
Production

Using Compression

5350
Production

Tech Talk - Sherman Filterbank

7621
Tv

Tech Talk - Funktion One

6736
Tv

The Creation of Techno Music

5986
Tv

Mixing for vinyl record

6026
Production

20 tips on home mastering

6947
Mastering

18 ways to give your music groove

8480
Production

23 tips for better home recordings

7770
Production

48 ambient production tips

14295
Production

30 EQ techiques

9302
Production

35 music production pro tips

9565
Production

Pre master levels

11230
Mastering

9 mastering tips for beginners

9791
Mastering

20 tips on music mixing

8383
Production

8 synthesis tips for beginners

7675
Production

Your guide to frequency

16272
Production